NO RISK OF FREEZING
COOLING UP TO < 0,5°C
COOLS EVEN POLLUTED WATER
Full construction stainless steel
High heat transfer efficiency
Constant temperature of the chilled water
No ice damage risk
The Omega Falling Film Chiller is a water cooler based on Pillow Plate technology. With the ice water at temperature (<0.5 °C) from a Falling Film Chiller you can cool large amounts of product in a short time. This recirculating
water cooler, which cools the water at a constant temperature, is a suitable solution for the continuous cooling of your products.Because every cooling requirement is different, our Falling Film Chillers are always custom-made.
We calculate the best solution for you.What is a Falling Film Chiller?Omega Falling Film Chiller is suitable for cooling water to a certain desired temperature. Ice water is used to cool large quantities
of your product in a short amount of time, for example to blanch vegetables or to mix with concrete in prevention to dry quickly. Due to the open system it is also suitable for cooling contaminated liquids.It’s also possible
to recirculate the water and let Omega Pillow Plates cool the water down again to the right temperature. With this recirculating Falling Film Chiller your products are continuously cooled to an even temperature.
How does a Falling Film Chiller work?In the upper container of the appliance, the water will be divided into small holes to the double embossed Pillow Plates, hanging underneath. A thin layer of water falls over the
plate and is cooled to the desired temperature. The water can be cooled to 0,5 °C with a Falling Film Chiller.This cooled water is pumped into a container and distributed to the user(s), such as a plate heat exchanger or process
The used water is collected in a reservoir and pumped back to the top of the Falling Film Chiller. The water is cooled again in the same way.
All our Falling Film Chillers are custom-made. Together, we discuss your needs to cool and the right capacity.
Depending on your expectations, our coolers can be produced with a capacity of 10 to 2,500 kWatt per unit.The water can be cooled over a wide temperature range: ΔT 30 °C is possible with recirculation.
Almost all cooling media can be used with this Falling Film Chiller, such as R717, CO2, Propylene glycol, Ethylene glycol, R22, R134A and R404A.
If you want to use other cooling media, please let us know.
The Falling Film Chiller is made of stainless steel, such as 304, 316, SMO-254 and Duplex 2205. If you want a cooler made of a different material we are happy to look into it.
In many production processes where the cooling of large quantities of product is required, the Omega Falling Film Chiller is a solution.Examples of where our coolers are used are: