LOW ENERGY CONSUMPTION
NO MOVING PARTS
Omega Ice Machines can be used in various industries. Our Ice Machines are the ideal solution if you require large amounts of ice for your application. The Omega Ice Machine is designed with efficiency in mind, they take up less space
and are easy to maintain due to utilization of laser welded Omega Pillow Plates which function as the evaporator.
How does an Ice Machine work?The Omega Ice Machine works as follows: Water is pumped into a distribution pan, from here it flows down and films on the exterior of the Pillow Plates. A refrigerant is pumped
on the interior of the evaporator which results in a uniform ice build-up on the exterior of the Pillow Plates. Once the ice reaches a thickness of between 5mm and 10mm, depending on the application requirements, there is a hot
gas cycle applied to the inside of the evaporator so the ice build-up is released from the exterior of the Pillow Plates to fall down into a reservoir. Once the ice falls down it breaks into smaller pieces which then allows it
to be pumped out or transported by a screw conveyor to where the ice is required.
All of our Ice Machines are custom-made. Please consult us so we can discuss your requirements for cooling or heating and determine which solution is best suitable for you. Below are some of the service medium and material
Depending on your requirements, Omega Ice Machines produce 1.000 to > 100.000 kg of ice a day.Per Pillow Plate, 5 - 10 mm of ice can be frozen on both sides at a time.
Almost all cooling or heating mediums can be used with our Ice Machines, such as R717, CO2, Propylene Glycol, Ethylene Glycol, and Freon refrigerants.
If you want to use other coolants, please e-mail us.
Omega Ice Machines can be made of stainless steel types such as 304, 316, SMO-254 and Duplex 2205. If you need specific materials, please e-mail us.